OBSOLETE GE GENUIS IC693TCM302 (FANUC) TEMP CONTROL MODULEEnhanced
Genius Communications Module
GE Fanuc is the manufacturer of IC693TCM303.Itis one of the
Temperature Control Modules or TCM. TCM provides temperature
control for as many as eight channels. There are two identical
models for TCM differing in resolution ratings and temperature
range. The TCM comes with important features, including its ability
to operate in a closed loop or open loop mode. It can relay an
output and a thermocouple for each of the terminals and has a
voltage capability of 12V in common mode. It can report and detect
for a reverse and open thermocouple, and can also report and detect
when the temperature is out of tolerance.
QUICK DETAILS
Module Type: Thermocouple Input
Output Voltage Range: 18 to 30 volts DC
Load Current: 100 mA per point
No. of Channels: 8 T/C In and 8 DC out
Internal Power Used: 150 mA @ 5 VDC
DC Power: Yes
The module has two plug-in connectors. They connect the external
power source for the output relays, RTD and the field devices (such
as thermocouples and relays). Terminals with captive screw are on
the connectors. It makes field wiring a connection easy. The front
cover of the module comes with a label of each terminal’s signal
name for every available connector. Left-hand side connectors are
specifically for input connections, and right-hand side connectors
are for output connections. LED indicators are present to indicate
the current state of the module. The states include External Power
or P, Run or R, Fault or F, Short or S, and Output Status (1-8). The IC693TCM303 is an extended or upgraded range of the
IC693TCM302. The temperature range for Thermocouple J and
Thermocouple L for IC693TCM303 is 0°C to 750°C. Temperature ranges
for Thermocouple R for IC693TCM302/303 are 0°C-600°C/0°C-1050°C
respectively, and the resolution is 12bits/0.5°C for IC693TCM303.
OTHER SUPERIOR PRODUCTS
| Yasakawa Motor, Driver SG- | Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- | Emerson VE-,KJ- |
| Honeywell TC-,TK- | GE Modules IC - |
| Fanuc motor A0- | Yokogawa transmitter EJA- |
Contact person: Anna
E-mail: wisdomlongkeji@163.com
Cellphone: +0086-13534205279
SIMILAR PRODUCTS
IC693CPU351A IC693CPU351B IC693CPU351C
IC693CPU351D IC693CPU351E IC693CPU351F
IC693CPU351G IC693CPU351H IC693CPU351I
IC693CPU351J IC693CPU351K IC693CPU351L
IC693CPU351M IC693CPU351N IC693CPU351O
IC693CPU351P IC693CPU351Q IC693CPU351R
IC693CPU351S IC693CPU351T IC693CPU351U
IC693CPU351V IC693CPU351W IC693CPU351X
IC693CPU351Y IC693CPU351Z IC693CPU351-AA
IC693CPU351-AB IC693CPU351-AC IC693CPU351-AD
IC693CPU351-AE IC693CPU351-AF IC693CPU351-AG
IC693CPU351-AH IC693CPU351-BA IC693CPU351-BB
IC693CPU351-BC IC693CPU351-BD IC693CPU351-BE
IC693CPU351-BF IC693CPU351-BG IC693CPU351-BH
IC693CPU351-CA IC693CPU351-CB IC693CPU351-CC
IC693CPU351-CD IC693CPU351-CE IC693CPU351-CF
IC693CPU351-CG IC693CPU351-DA IC693CPU351-DB
IC693CPU351-DC IC693CPU351-DD IC693CPU351-DE
IC693CPU351-DF IC693CPU351-DG IC693CPU351-EA
IC693CPU351-EB IC693CPU351-EC IC693CPU351-ED
IC693CPU351-EE IC693CPU351-EF IC693CPU351-EG
IC693CPU351-FA IC693CPU351-FB IC693CPU351-FC
IC693CPU351-FD IC693CPU351-FE IC693CPU351-FF
IC693CPU351-FG IC693CPU351-GA IC693CPU351-GB
IC693CPU351-GC IC693CPU351-GD IC693CPU351-GE
IC693CPU351-GF IC693CPU351-GG IC693CPU351-BH
IC693CPU351-CH IC693CPU351-CJ IC693CPU351-DH
IC693CPU351-DJ IC693CPU351-DK IC693CPU351-EK
IC693CPU351-EL IC693CPU351-EM IC693CPU351-FM
IC693CPU351-GN IC693CPU351-GP IC693CPU351GR
IC693CPU351-GS IC693CPU351-GT IC693CPU351-HT
The Enhanced Genius Communications Module (GCM+), IC693CMM302, is
an intelligent module that provides automatic global data
communications between a Series 90-30 PLC and up to 31 other
devices on a Genius bus. The GCM+ can be located in any standard
Series 90-30 CPU baseplate, expansion baseplate, or remote
baseplate. However, for most efficient operation, it is recommended
that the module be installed in the CPU baseplate since the sweep
impact time of the GCM+ module depends on the model of PLC and the
baseplate where it is located. Note: if a GCM module is present in
a system, GCM+ modules cannot be included in the system. Multiple
GCM+ modules can be installed in a Series 90-30 PLC system with
each GCM+ having its own Genius bus serving up to 31 additional
devices on the bus. For example, this allows a Series 90-30 PLC
with three GCM+ modules to exchange global data with as many as 93
other Genius devices automatically. In addition to basic global
data exchange, the GCM+ module can be used for various applications
such as: Data monitoring by a personal computer or an industrial
computer. Monitoring data from Genius I/O blocks (although it
cannot control Genius I/O blocks). Peer-to-peer communications
among devices on the bus. Master-slave communications among
devices on the bus (emulates remote I/O). The Genius bus connects
to the terminal board on front of the GCM+ module
The LEDs on the front of the GBC indicate its operating status and
should be on during normal operation. OK Shows the status of the
GBC module. This LED turns on after power up diagnostics are
completed. COM Shows the status of the Genius communications bus.
This LED is on steadily when the bus is operating properly. It
blinks for intermittent bus errors and is off for a failed bus. It
is also off when no configuration has been received from the PLC
CPU.
