Rotary measurement sensors with high accuracy and high resolution.
Encoders, at present, have been widely used for factory
automations, measurements, office automation devices, medical
equipment, aviation and universal fields. Various kinds of encoders
(FA-CODER® as trade mark) from small to high absolution are
available to meet all of the requirements.
◆About Incremental encoder
Incremental encoders generate pulses in a frequency proportional to
the rotational speed.The encoders can be used for speed control,
position control, or as a rotation indicator or a pulse generator
of servo motors mounted in machine tools, robots, or measuring
equipment.Optical incremental encoders are composed of rotor plate,
fixed slit, light emitting diodes, photo transistors, etc. as shown
in Figure 1.The fixed slit is designed to have 90 degree phase
difference to the slit on the rotor plate.Output signals are two
signals with 90 degrees difference; A-phase signal and B-phase
signal, and the rotational direction can be detected with
them.There are encoders which output the additional Z-phase signal
as the origin signal.When controlling positions with an incremental
encoder, the Z signal which shows the origin is used.
Models:
| Model No. | TS53□□ | TS51□□ | TS50□□ | TS50□□ |
|---|
| Outside Diameter | Φ38mm | Φ66mm | □68mm | Φ128mm |
|---|
| Series | OIS38 | OIS66 | OIS68 | OIS128 |
|---|
| Resolution (Counts/Turn) | 100~2,500C/T | 100~5,000C/T | 25~5,000C/T |
|---|
| Output Phase | A,B,Z Phase | A,B Phase |
|---|
| Max Response Frequency | 200kHz | 125kHz | 25kHz |
|---|
Consumption Current
(NOTE 1) | 100mA Max | 200mA Max | 300mA Max |
|---|
| Output Form | Open Collector
Line Driver | Voltage
Open Collector
Line Driver | Voltage
Complementaly |
|---|
Shaft Loading
(NOTE 2) | Radial | 21.6N
(2.2kgf) | 98N
(10kgf) | 392N
(40kgf) |
|---|
| Axial | 10.8N
(1.1kgf) | 12.7N
(1.3kgf) | 49N
(5kgf) |
|---|
| Starting Torque | 4.4×10-3N⋅m
(45gf⋅cm Max) | 2.9×10-3N⋅m
(30gf⋅cm Max) | 9.8×10-2N⋅m
(1kgf⋅cm Max) | 0.2N⋅m
(2kgf⋅cm Max) |
|---|
Protection
(NOTE 3) | IP=50 | IP=52 | IP=57 |
|---|
| Operating Temp.Range | -10∼+70°C
(OIS38 Series Line Driver Type:0∼+75°C) | 0∼+50°C |
|---|
| Vibration(NOTE 4) | 49m/s2 (5G) | 98m/s2 (10G) |
|---|
| Shock(NOTE 5) | 490m/s2 (50G) | 980m/s2 (100G) |
|---|
| Mass | 0.15kg Max | 0.5kg Max | 1kg Max | Mount Type:7kg Max
Flange Type:8kg Max |
|---|
Magnetic Encoder
| Model No. | TS5270N15 | TS5291N100 | TS5291N500 |
|---|
| Series | MIB0.4 |
|---|
| Resolution (Counts/Turn) | 1,024C/T
(Number of teeth = 256) | 1,024C/T
(Number of teeth = 128) | 128C/T |
|---|
| Output Phase | A,B,Z Phase |
|---|
| Max Response Frequency | 200kHz | 409.6kHz | 128kHz |
|---|
| Supply Voltage | DC+5V |
|---|
| Consumption Current | 300mA Max | 200mA Max | 100mA Max |
|---|
| Output Form | Line Driver |
|---|
| Air Gap btwn Sensor & Wheel | 0.15±0.01mm | -- |
|---|
| Radial Inalignment btwn Sensor & Wheel | ±0.3mm | -- |
|---|
| Axial Inalignment btwn Sensor & Wheel | ±0.5mm | -- |
|---|
| Starting Torque | -- |
|---|
| Protection | IP=50 | IP=66 |
|---|
| Operating Temp.Range | -10∼+80°C | -20∼+85°C |
|---|
| Vibration | Full Amplitude 1.5mm
0.5Hr(5∼500Hz) | 80m/s2 Max
3-way 3Hr(10∼2,000Hz) |
|---|
| Shock | 294m/s2 (30G) | 1,000m/s2 Max
11ms Half sine wave 3-way, Each 6 times |
|---|
| Mass | 0.5kg Max |
|---|
Similiar Models:
TS2014N311E32 TS2018N243E53 TS2151N1E26 TS2605N31E64
TS2610N171E64 TS2620N1051E11 TS2620N21E11 TS2620N23E11
TS2620N271E14 TS2620N523E98 TS2640N1381E10 TS2640N141E172
TS2640N181E100 TS2640N181E41 TS2640N311E107 TS2640N313E151
TS2640N31E64 TS2640N321E64 TS2640N641E10 TS2640N641E64
TS2640N663E70 TS2640N671E110 TS2640N683E87 TS2641N11E64
TS2650N11E78 TS2650N21E78 TS2651N111E78 TS2651N131E78
TS2651N141E78 TS2651N181E78 TS2660N31E148 TS3653N36E8
TS5017N60 TS5207N356 TS5207N500 TS5207N510 TS5207N530
TS5208N305 TS5208N530 TS5212N510 TS5212N397 TS5212N530
TS5212N593 TS5213N315 TS5213N367 TS5213N500 TS5213N510
TS5213N530 TS5213N550 TS5213N551 TS5214N510 TS5214N530
TS5216N558 TS5217N530 TS5231N305 TS5305N510 TS6063N154
