Product Description
The IC660BBA105 is a Current-source Analog 6 Output Block of GE
Fanuc series 90-30 PLCs. It belongs to the Analog Output Modules
group and can connect with either a 115 VAC or a 125 VDC power
supply. A different version of the same equipment can be powered
with 24/248VDC (IC660BBA025). It has six outputs whose output range
is between 4 mA to 20 mA and provides the system with different
types of diagnostics. Circuit power is isolated, and accuracy of
input is as precise as 0.15% at 25C.
Isolated power is provided to outputs by the block’s power source,
and no additional power supply is needed for current loops of 4 to
20 mA. Outputs are electrically all the same. The outputs convert
digital signals of 12 bits to analog signals for 0mA to 24mA.
Values display on the handheld screen as integers, individually for
every output. The IC660BBA105 Current-source Analog 6 Output Block
has a dedicated bus switching module output that connects to
specific BSM devices.
The IC660BBA105 Current-source Analog 6 Output Block can be confi
gured to hold the last output state, or a default state, and can
receive output feedback and feedback time. The circuit transforms
the signal to engineering values, and the block can work if there
is CPU redundancy. This equipment also provides fault reporting
that can be disabled if needed. Faults include output over-range
and under-range signal detection and feedback recognition of less
than 1.5 mA signals.
All Genius bus controllers are compatible with IC660BBA105
Current-source Analog 6 Output Block. To configure the block, the
user needs a handheld monitor of version 3.7 or above. The
programming software is Logicmaster 6 ver. 4.02 or later. CPUs that
are compatible with the block are rev. 105 or later for Series Six
PLCs, rev.110 and above for Series Six Plus, and rev. 3.0 or later
for series 5 PLCs. If a bus switching module is required,
IC660BSM021 is the only compatible option.
The IC660BBA105 Current-source Analog 6 Output Block has 32
terminals. Power source connects to terminals 6 and 7. Output
cables connect to the self-powered inputs 11 to 32. Bus Switching
Module connects to terminals 9-10.
Technical Specifications
| Rated Voltage: | 115 VAC/ 125 VDC |
| # of Points: | 6 |
| Output Range: | 4 mA to 20 mA, 0 mA to 24 mA |
| Resolution: | 6 micro Amp |
| Operating Voltage: | 93-132 VAC / 105-145 VDC |
| Points per Common: | One group of 6
|
Ge Fanuc IC660BBA105 , Current-Source Analog 6 Output Block Series
90-30 PLCs
Product Description
The IC660BBA105 is a Current-source Analog 6 Output Block of GE
Fanuc series 90-30 PLCs. It belongs to the Analog Output Modules
group and can connect with either a 115 VAC or a 125 VDC power
supply. A different version of the same equipment can be powered
with 24/248VDC (IC660BBA025). It has six outputs whose output range
is between 4 mA to 20 mA and provides the system with different
types of diagnostics. Circuit power is isolated, and accuracy of
input is as precise as 0.15% at 25C.
Isolated power is provided to outputs by the block’s power source,
and no additional power supply is needed for current loops of 4 to
20 mA. Outputs are electrically all the same. The outputs convert
digital signals of 12 bits to analog signals for 0mA to 24mA.
Values display on the handheld screen as integers, individually for
every output. The IC660BBA105 Current-source Analog 6 Output Block
has a dedicated bus switching module output that connects to
specific BSM devices.
The IC660BBA105 Current-source Analog 6 Output Block can be
configured to hold the last output state, or a default state, and
can receive output feedback and feedback time. The circuit
transforms the signal to engineering values, and the block can work
if there is CPU redundancy. This equipment also provides fault
reporting that can be disabled if needed. Faults include output
over-range and under-range signal detection and feedback
recognition of less than 1.5 mA signals.
All Genius bus controllers are compatible with IC660BBA105
Current-source Analog 6 Output Block. To configure the block, the
user needs a handheld monitor of version 3.7 or above. The
programming software is Logicmaster 6 ver. 4.02 or later. CPUs that
are compatible with the block are rev. 105 or later for Series Six
PLCs, rev.110 and above for Series Six Plus, and rev. 3.0 or later
for series 5 PLCs. If a bus switching module is required,
IC660BSM021 is the only compatible option.
The IC660BBA105 Current-source Analog 6 Output Block has 32
terminals. Power source connects to terminals 6 and 7. Output
cables connect to the self-powered inputs 11 to 32. Bus Switching
Module connects to terminals 9-10.
Technical Specifications
| Rated Voltage: | 115 VAC/ 125 VDC |
| # of Points: | 6 |
| Output Range: | 4 mA to 20 mA, 0 mA to 24 mA |
| Resolution: | 6 micro Amp |
| Operating Voltage: | 93-132 VAC / 105-145 VDC |
| Points per Common: | One group of 6
|
