GE FANUC IC693MDL732 , 0.5 Amp Positive Logic Output Module , 90-30
Series
Product Description
IC693MDL732 is a 0.5 Amp positive Logic output module that delivers
12/24V of voltage with 8 output points per group in a group of 8,
sharing a common power output terminal. It’s based on the 90-30
series PLC system. Maximum output per point is 0.5 Amp and a
maximum of 2 Amps per common power output. This Output module was
tailored to source current to the loads from the user common or
positive power bus. Thanks to its design, the module offers
unrivalled versatility. The output characteristics are compatible
with a myriad of load devices such as solenoids, motor starters and
indicators.
These output characteristics include ON and OFF response maximum
time of 2ms, off-state leakage of 1mA maximum, output voltage drop
of 1 volt maximum and an in-rush current 4.78 Amps for 10ms. Power
for operation of the field devices is supplied by the user.
At the top of the module, you’ll locate LED indicators which are
used to display the ON / OFF status of each point The LED block
comprises two horizontal rows with each row having 8 green LEDs.
The top is labelled row is labelled A1 to A8 (first 8 points) and
the bottom labelled from A9 right through A16 (Another 8 points).
Be sure to find an insert that goes between the inside and outside
surface of the hinged door. The circuit wiring information is found
towards the inside of the module when the hinged door is shut. The
circuit identification information can be recorded on the outside
surface. The outside left edge of the insert is coded blue to
indicate a low-voltage module. The IC693MDL732 output module
however, does not have fuses. It can be installed in any I/O slot
of 5 0r 10-slot baseplate in the 90-30 PLC system.
About IC693MDL732
The GE Fanuc IC693MDL732 module is a positive logic I/O module for
Series 90-30 PLCs. The programmable and versatile Series 90-30 PLCs
can be assembled from a wide variety of modular components. The
basic PLC components are baseplates, power supplies, CPUs, I/O
modules, option modules, and cables. The IC693MDL732 module is a
discrete output module.
GE Fanuc also provides several other types of I/O modules including
analog input/output modules and analog/digital combination modules.
There are 8 outputs on the IC693MDL732 module. The output current
per point can go up to a maximum of 0.5 Amps. The peak output
current per common is 2 Amps. The power requirements of the
IC693MDL732 module is 50 milliamps of current when all the outputs
are on. The module is designed for 5 Volts DC input voltage.
The IC693MDL732 module's inrush current is 4.78 Amps for 10
milliseconds. The output voltage drop is 1 Volt (maximum). The
maximum off-state leakage is 1 milliamp. The maximum "on" response
time is 2 milliseconds and the maximum "off" response time is 2
milliseconds. The rated voltage for the module is 12 to 24 Volts
DC. The IC693MDL732 module is designed for positive logic
characteristics. The output device is connected between the
negative power bus and the output module.
The module output characteristics are compatible with a wide range
of user-supplied load devices including motor starters, indicators,
and solenoids. The power for field devices is user-supplied. LED
indicators which provide the on and off status of each of the
module points are located at the top of the module. No fuses are
available on the IC693MDL732 module.
Technical Specifications
| Rated Voltage: | 12/24 volts DC |
| # of Outputs: | 8 |
| Freq: | n/a |
| Output Load: | 0.5 Amps |
| Output Voltage Range: | 12 to 24 volts DC |
| DC Power: | Yes |
Technical Information
Specifications
Rated Voltage 12/24 volts DC
Output Voltage Range 12 to 24 volts DC (+20%, –15%)
Outputs per Module 8 (one group of eight outputs)
Isolation 1500 volts between field side and logic side
Output Current 0.5 amps maximum per point
2 amps maximum per common
Output Characteristics
Inrush Current 4.78 amps for 10 ms
Output Voltage Drop 1 volt maximum
Off-state Leakage 1 mA maximum
On Response Time 2 ms maximum
Off Response Time 2 ms maximum
Power Consumption 50 mA (all outputs on) from 5 volt bus on
backplane
