Industrial Servo Drives Yaskawa Servopack 200V Model: SGDM-60ADA
5500W 3Phease
Quick Details
Brand Name:Yaskawa
Model Number:SGDM-60ADA
Input Voltage:200-230V
Input Current: 32A
Input Frequency:50/60HZ
Input PH : 3
Series : Sigma 2 (Σ-II Series)
Output Power : 5.5KW
Output Voltage: 0-230V
Output Current: 42.1A
Output Frequency:0-300Hz
Output PH :3
Temperture: 0-55℃
Place of Origin:Japan
Efficiency:IE 1
Similar Products
100W SGMAH-01AAA41+SGDM-01ADA
100W tape is made to move SGMAH-01AAA4C +SGDM-01ADA
200w SGMAH-02AAA41+SGDM-02ADA
200W tape is made to move SGMAH-02AAA4C +SGDM-02ADA
400W SGMAH-04AAA41+SGDM-04ADA
400W tape is made to move SGMAH-04AAA4C +SGDM-04ADA
750w SGMAH-08AAA41+SGDM-08ADA
750W tape braked SGMAH-08AAA4C+SGDM-08ADA
SGMGH type (1500RPM)
Capacity (W) Type
450 SGMGH-05ACA61+SGDM-05ADA
450W tape brakes SGMGH-05ACA6C +SGDM-05ADA
850W SGMGH-09ACA61+SGDM-10ADA
850W tape is made to move SGMGH-09ACA6C +SGDM-10ADA
1.3KW SGMGH-13ACA61+SGDM-15ADA
1.3KW tape is made to move SGMGH-13ACA6C +SGDM-15ADA
2KW SGMGH-20ACA61+SGDM-20ADA
2KW tape is made to move SGMGH-20ACA6C +SGDM-20ADA
3KW SGMGH-30ACA61+SGDM-30ADA
3KW tape is made to move SGMGH-30ACA6C +SGDM-30ADA
4.4K SGMGH-44ACA61+SGDM-50ADA
4.4KW tape brakes SGMGH-44ACA6C +SGDM-50ADA
5.5K SGMGH-55ACA61+SGDM-60ADA
5.5KW tape is made to move SGMGH-55ACA6C +SGDM-60ADA
7.5K SGMGH-75ACA61+SGDM-75ADA
7.5KW tape brakes SGMGH-75ACA6C +SGDM-75ADA
11KW SGMGH-1AACA61+SGDM-1AADA
11KW SGMGH-1AACA6C+SGDM-1AADA
15KW SGMGH-1EACA61+SGDM-1EADA
15KW SGMGH-1EACA6C+SGDM-1EADA
100W: SGMJV-01ADD6S+SGDV-R90A11A
SGMJV-01ADD6E+SGDV-R90A11A
200W: SGMJV-02ADD6S+SGDV-2R8A11A
SGMJV-02ADD6E+SGDV-2R8A11A
400W: SGMJV-04AAA61/C+SGDV-2R8A11A
SGMJV-04ADD6E/S
750W: SGMJV-08AAA61/C+SGDV-5R5A11A
SGMJV-08ADD6E/S
850W: SGMGV-09ADC61/C+SGDV-7R6A01A
1.3KW: SGMGV-13ADC61/C+SGDV-120A01A
2KW: SGMGV-20ADC61/C+SGDV-180A01A
3KW: SGMGV-30ADC61/C+SGDV-200A01A
4.4KW: SGMGV-44ADC61/C+SGDV-330A01A
5.5KW: SGMGV-55ADA61/C+SGDV-470A01A
7.5KW: SGMGV-75ADA61/C+SGDV-550A01A
11KW: SGMGV-1AADA61/C+SGDV-590A01A
15KW: SGMGV-1EADA61/C+SGDV-780A01A
Model follow-up control
A mechanical system is modeled to compensate for system delay and
suppress vibrations when a machine has a low characteristic
frequency. This function reduces the settling time of rigid
machinery.
Vibration suppression control
The observer reduces the vibration, and high servo gain drive is
achieved when a machine drive system is subject to vibrations. This
function enhances the servo characteristics.
Mechanical resonance suppression filter
Resonance is suppressed by setting the vibration suppression filter
in accordance with mechanical system resonance frequency when a
high frequency resonance noise is made by the machine.
Torque reference filter
In the event that shaft resonance causes vibration in the servo
system, the torque reference filter automatically suppresses
resonance.
Speed observer control
Use of the speed observer provides smooth motion even at low
speeds, and shorter position settling time.
Mode switch
To improve transient characteristics during motor acceleration and
deceleration, the system can be switched between speed loop PI
(proportional integral) and P (proportional) control, helping to
prevent overshoot and undershoot.
Feed forward compensation
Feed forward compensation provides reduced positioning time.
Can be optimized with load conditions to shorten positioning time
Zero clamp operation
When speed control is used, drift may occur even with a speed
command of 0V. The zero clamp function uses a position loop to stop
servo-lock below a preset speed command.
SGDM -60ADA
Digital Operator (Type JUSP-OP02A-2)
OTHER SUPERIOR PRODUCTS
| Yasakawa Motor, Driver SG- | Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- | Emerson VE-,KJ- |
| Honeywell TC-,TK- | GE Modules IC - |
| Fanuc motor A0- | Yokogawa transmitter EJA- |
Contact person: Anna
E-mail: wisdomlongkeji@163.com
Cellphone: +0086-13534205279
